Products

BC 1000 Silicone Based Release Agent

BC 1000 is blended silicone based release agent that exhibits good release characteristics in  both elevated and room temperature  urethane, and epoxy…

View full product info…

BC 709 Urethane Elastomer

BC 709 is a two-component system consisting of Iso (side A) and Curative (side B). It is designed to be…

View full product info…

BC 809 Urethane Elastomer

BC809 is a two‐component system consisting of Iso (side A) and Curative (side B). It is designed to be used…

View full product info…

BC 8104 Rigid Polyurethane Foam (4 pcf )

BC 8104 is a 4 LB/FT3 two-component urethane rigid foam designed for general purpose molding and casting of various shapes. This product is…

View full product info…

BC 8108 Rigid Polyurethane Foam (8 pcf )

BC 8108 is a 8 LB/FT3 two-component urethane rigid foam designed for general purpose molding and casting of various shapes. This product…

View full product info…

BC 8110 rigid Polyurethane Foam (10 pcf )

BC 8110 is a 10 LB/FT3 two-component urethane rigid foam designed for general purpose molding and casting of various shapes. This product is…

View full product info…

BC 8201 No Shrinkage Concrete Stamp Pad Material

BC 8201 when blended with BC  ISO 25  will yield a 80 Shore A material ideal for concrete stamp pads.  These pads can…

View full product info…

BC 8202 Concrete Texturing Skin Material

BC 8202 when blended with BC ISO 25 will yield a 90 Shore A  material that is ideal for concrete…

View full product info…

BC 8250SE Polyurea Spray Elastomer

BC8250SE  is a two component 100% polyurea spray elastomer system designed for industrial coating applications.

BC 8321Three Component Variable Durometer 10-20 Shore A

BC8321 is used to make soft molds of detailed masters that contain deep undercuts. Some of the most common uses…

View full product info…

BC 8500 Series General Casting System

The BC 8500 series is a family of two-component, easy-to-use, room temperature mixing and curing MDI systems. With a range…

View full product info…

BC 909 Urethane Elastomer

BC909 is a two-component system consisting of Iso (side A) and Curative (side B). It is designed to be used…

View full product info…

BC Flex-Kast Clear Series

Flex-Kast Clear is a two-component water clear UV resistant urethane elastomer compound designed for general purpose molding and casting of…

View full product info…

BC100 Cyanoacrylate Adhesives—Ancillaries

BCC Products, Inc./Blehm Plastics is proud to announce we’ve added the specialty chemistry of cyanoacrylate adhesives to our quality product…

View full product info…

BC100 Cyanoacrylate Adhesives—Medium

BCC Products, Inc./Blehm Plastics is proud to announce we’ve added the specialty chemistry of cyanoacrylate adhesives to our quality product…

View full product info…

BC100 Cyanoacrylate Adhesives—Thick

BCC Products, Inc./Blehm Plastics is proud to announce we’ve added the specialty chemistry of cyanoacrylate adhesives to our quality product…

View full product info…

BC100 Cyanoacrylate Adhesives—Thin

BCC Products, Inc./Blehm Plastics is proud to announce we’ve added the specialty chemistry of cyanoacrylate adhesives to our quality product…

View full product info…

BC20 Brushes

Our natural bristle brushes are available in three sizes: 1″, 2″, and 4″

BC28 Hand Cleaner

Our hand cleaner is available in 12oz bottles.

BC45 Cartridge Dispenser

This dispenser is used with our three-gallon paste cartridges.

BC4544 Carvable Wood Filler

Our carvable wood filler is an amazing quick-set filler developed for the pattern and model-making industry. A lightweight thixotropic paste…

View full product info…

BC4553 Instant Buildup Material

Our instant buildup material is designed for repairing plastic surfaces and models. Recommended for SMC and FRP parts, vacuum forming…

View full product info…

BC4558 Quick-set Repair Putty

Approved by the Federal Aviation Authority (FAR 25.853), our quick-set repair putty is ideal for aircraft repairs. It is used…

View full product info…

BC4570 Multi-purpose Two-part Filler Paste

BC4570 is a multipurpose two-part filler paste developed for making quick repairs to a variety of substrates where service temperature…

View full product info…

BC4578 Model Board Filler

Our model board filler is a quick-setting, easy-to-use, polyester, developed specifically for repairs to MB 2001 modeling board. Its lightweight…

View full product info…

BC5003 Laminating System

BC5003 is a medium viscosity, unfilled, laminating system. It’s a room-temperature curing resin with a relatively short pot life. It’s…

View full product info…

BC5008-2 General Purpose Resin System

BC5008-2 is a very low viscosity, modified, unfilled, room-temperature curing, general purpose resin system that will also function as a…

View full product info…

BC5009 Epoxy Adhesive and Laminating Resin

BC5009 is a very low viscosity, modified, unfilled room-temperature curing epoxy system with high-performance capabilities. Built for companies needing a…

View full product info…

BC5010 Laminating Resin

BC5010 is a high-quality, low-viscosity. room-temperature curing laminating resin that creates a safety system for the production of a variety…

View full product info…

BC5105 Laminating System

BC5105 is a clear, unfilled, low-viscosity laminating system. This heat-resistant resin exhibits excellent “wet-out” and reasonable working time. Generally it…

View full product info…

BC5114 Laminating System

BC5114 is a gray, low-viscosity laminating system. This heat-resistant resin exhibits excellent “wet-out” and reasonable working time. Generally it may…

View full product info…

BC5500 Low Viscosity Resin Infusion System

BC5500 is a very low viscosity yet tough system for the production of composite parts and tools using an infusion…

View full product info…

BC5502 60 Minute Low Viscosity Resin Infusion System

BC 5502 is a 60-minute low viscosity room temperature epoxy resin toughened infusion system. BC5502 is ideal for  applications where a very low…

View full product info…

BC5503 Intermediate Temperature Low Viscosity Epoxy Resin Infusion System

BC5503 is an intermediate to high temperature low viscosity epoxy resin toughened infusion system. BC5503 is ideal for  applications where a intermediate low viscosity yet…

View full product info…

BC6004 Epoxy Surface Coat

BC6004 is a white thixotropic epoxy surface coat that has the ability to cure and bond to freshly poured wet…

View full product info…

BC6005 Epoxy Surface Coat

BC6005 is a snow-white thixotropic epoxy resin designed specifically for quality reproduction of a variety of surfaces. A room-temperature cure…

View full product info…

BC6060 Epoxy Surface Coat

BC6060 is a blue epoxy, abrasion-resistant, surfacing resin. Commonly referred to as “die surface” material, this system may be applied…

View full product info…

BC6126 Epoxy Surface Coat

BC6126 is a gray, low-toxicity, aluminum-filled, epoxy surface coat that provides excellent surface duplication, along with vertical coverage to 1/16″…

View full product info…

BC6128 Epoxy Surface Coat

BC6128 is a black, non-staining, silicon-carbide filled, “die surface,” surfacing resin. This thixotropic resin system provides excellent surface duplication, along…

View full product info…

BC6250 Adhesive and Patch

Color and CTE matched adhesive for high temperature epoxy tooling board. BCC Products BC6250 R/H is a use temperature, color and…

View full product info…

BC7009-1 Casting Epoxy System

BC7009-1 is an iron-filled, low-cost mass casting system. Without foaming or yielding excessive shrinkage, this system can achieve thickness of…

View full product info…

BC7009-2 Casting Epoxy System

BC 7009-2 is an iron oxide filled, low-cost mass casting system recommended for use in casting non-conductive molds at a…

View full product info…

BC7020 Backfill System

BC7020 is a lightweight two-component epoxy backfill system. Unlike BC7010, the filler portion is pre-blended into the resin and hardener…

View full product info…

BC7053 Casting Epoxy System

BC7053 is an iron-filled epoxy casting system. This system features a high iron content material that provides unsurpassed wear resistance….

View full product info…

BC7062/BC7062-1 Casting Epoxy Systems

The BC7062 family of mass casting resins are aluminum filled, low viscosity epoxy. Without foaming or yielding excessive shrinkage, the BC7062-1…

View full product info…

BC7062/BC7062-2 Casting Epoxy System

The BC7062 family of mass casting resins are aluminum filled, low viscosity epoxy. Without foaming or yielding excessive shrinkage, the BC7062-2…

View full product info…

BC7062/BC7062-3 Casting Epoxy System

The BC7062 family of mass casting resins are aluminum filled, low viscosity epoxy. Without foaming or yielding excessive shrinkage, the…

View full product info…

BC7136 Casting Epoxy System

BC7136 is a gray, low-toxicity, aluminum-filled, epoxy casting resin. This heat resistant system may be used at room temperature without…

View full product info…

BC7136/BC7136-2H Casting Epoxy System

BC7136-2H is a thick section casting system with heat resistance to 300°F. It may be cast to a thickness of…

View full product info…

BC8001 Kwik-Kast

BC8001 is an advanced fast-cast polyurethane tooling system. It features low viscosity, low exotherm, and minimal shrinkage. It cures hard,…

View full product info…

BC8002 Kwik-Kast II

BC8002 Kwik-Kast II is an enhanced fast-cast polyurethane tooling system. It has been redesigned to provide greater moisture resistance, improved…

View full product info…

BC8007 Lik-Wood

BC8007 Lik-Wood is a low-viscosity, quick-setting, easy-to-use casting material. A model or tool cast from Lik-Wood will weigh 60% less…

View full product info…

BC8009 Slo-Kast

BC8009 Slo-Kast is a low-viscosity, medium-setting, easy-to-use casting material. When properly cured, this polyurethane system features extremely low shrinkage. Unlike…

View full product info…

BC8010 Metal-Kast

BC8010 is a quick-setting urethane reproduction plastic system that simulates many of the desirable characteristics of aluminum metal. This highly…

View full product info…

BC8086 Polyurethane Casting System

BC8086 is a rapid-setting, low-viscosity, polyurethane casting system. It has a working life of 45 seconds, and at 7–10 minutes…

View full product info…

BC8160 Prototyping Resin

BC8160 prototyping resin is a impact- and abrasion-resistant polyurethane resin that can be used in all types of designs and…

View full product info…

BC8163 Proto-Kast

BC8163 is a very low-viscosity, rapid-setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact-resistant casting….

View full product info…

BC8165 Urethane Compound

BC8165 is a low-viscosity, rapid-setting, rigid urethane compound; it has an 8–10 minute working time. This system will cure quickly…

View full product info…

BC8340 Non Mercury Urethane Elastomer

BC8340 is a two-part polyurethane molding system. BC8340 is mixed one-to-one by volume (or 100 Iso Side A to 95…

View full product info…

BC8360 Non Mercury Urethane Elastomer

BC8360 is a two-part polyurethane molding system. BC8360 is mixed one-to-one by volume (or 100A-to-95B by weight) and cures at…

View full product info…

BC8400 Urethane System

BC8400 is an unfilled, low-viscosity, quick-setting, two-component urethane system. Its easy-to-use 1 to 1 mix ratio (Part A/Part B) offers…

View full product info…

BC8405 Urethane System

BC8405 is an unfilled, low-viscosity, quick-setting, two-component urethane system. Its easy-to-use 1 to 1 mix ratio (Part A/Part B) offers…

View full product info…

BC8645 Kwik-Kast Gray

BC8645 Kwik-Kast Gray is a two-component, fast-setting polyurethane reproduction plastic. Within 30 minutes at 77°F, BC8645 sets to a demoldable…

View full product info…

BC8650 Kwik-Kast Blue

BC8650 is an advanced fast-cast polyurethane tooling system that features low viscosity, low exotherm, and minimal shrinkage. Kwik-Kast Blue cures…

View full product info…

BC8655 Kwik-Kast Blue II

BC8655 is an advanced fast-cast polyurethane tooling system that features a working time several minutes longer than our BC 8650,…

View full product info…

BC8660E Urethane Elastomer

BC8660E is a multi-purpose elastomer that can perform many functions. Special product characteristics include: excellent for molds for casting of…

View full product info…

BC8782 Ultra Clear

BC8782 produces a high-impact, rigid, 82 Shore D material that is commonly used to make clear or tinted castings of…

View full product info…

BC8860 Urethane Elastomer

BC8860 is a low-viscosity, two-component urethane casting compound that is specifically formulated for high resistance to abrasion and impact. It…

View full product info…

BC8870 Urethane Elastomer

BC8870 is a low-viscosity, two-component urethane casting compound that is specifically formulated for high resistance to abrasion and impact. It…

View full product info…

BC8880 Polyurethane Elastomer Surface Coat

BC8880 is a two-part urethane gel coat that has excellent handling characteristics, very low moisture sensitivity, a high modulus, and…

View full product info…

BC8890 Urethane Elastomer Surface Coat

BC8890 is a two-part urethane gel coat that has excellent handling characteristics, very low moisture sensitivity, a high modulus, and…

View full product info…

BC8990 Urethane Elastomer

BC8990 is a two-component urethane elastomer compound specifically designed for general purpose molding and casting of various shapes. This product…

View full product info…

BC9020 Silicone RTV Rubber

BC9020 is a violet colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature. The cured…

View full product info…

BC9040T Clear Silicone System

BC9040T is a clear, addition/platinum cure, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or…

View full product info…

BC9060 Blue Silicone System

BC 9060 is a blue-colored, two-component, flowable compound that, regardless of thickness or confinement, cures at room temperature or by…

View full product info…

BCC Fiberglass—10 ounce Cloth

BCC fiberglass part-making cloth, 10 ounce weight, is available in a straight weave (style #7500) roll 40″ wide by 109…

View full product info…

BCC Fiberglass—40 ounce Cloth

BCC fiberglass part-making cloth, 40 ounce weight ideal for tool building and structures, is available in a straight weave (style…

View full product info…

BCC Filler Materials—BC32 Glass Fibers

In plastic tooling compounds, BC32, microglass milled fibers will increase the mechanical strength, such as impact strength, tensile strength, compressive…

View full product info…

BCC Filler Materials—BC35 Flock/White

BC35 Flock/White is used as a thickening agent with laminating resin to achieve heavy paste consistencies.

BCC Filler Materials—BC37 Hollow Microspheres (Ceramic)

BC37,  hollow ceramic microspheres, provides an efficient, lightweight filler material for applications using most resins.

BCC Filler Materials—Calcium Carbonate

Available in 50 lb. bags

BCC Filler Materials—Fumed Silica

Available in 10 lb. bags

BCC Release Agents—BC83 Liquid Wax (Parting)

BC83 liquid wax parting/white is an excellent low-viscosity, easy-to-use release agent for two-component epoxy and polyurethane systems.

BCC Release Agents—BC84 PVA Water Soluble (Parting)

BC84 PVA parting/green is a water/alcohol solution of water-soluble, film-forming materials. It is particularly recommended as a parting layer for…

View full product info…

BCC Release Agents—BC87 Urethane (Parting)

BC87 urethane parting/yellow is an excellent low-viscosity, easy-to-use release agent for two-component polyurethane systems. Using BC87, rigid, semi-rigid, and flexible…

View full product info…

BCC Release Agents—Krytox (Mold Release)

Available in 11 oz spray cans.

BE290 Laminating Resin System

BE290 is a low-viscosity, medium pot life, room-temperature laminating system. It features low odor, reduced toxicity, and adequate working life…

View full product info…

Bench Top Systems—Pro Meter

As shown, the Pro Meter comes with standard 9 ft. hoses, gun, and 5 gallon reservoirs. A simple, yet highly…

View full product info…

Bench Top Systems—Super E

Super E, shown here with urethane options, is an air-powered, low-cost, two-part meter mix system for epoxies, urethanes, and silicones. …

View full product info…

BX-31 30 Shore A Elastomer For Concrete Casting

BX-31 is a two-part polyurethane molding system. BX-31 is mixed 100iso:97curative by weight (or 1 Pt-A Iso to 1 Pt-B…

View full product info…

BX-41 40 Shore A Elastomer For Concrete Casting

BX-41 is a two-part polyurethane molding system. BX-41 is mixed 100:97 by weight (or 1 Part-A Iso to 1 Part-B…

View full product info…

BX-51 50 Shore A Elastomer For Concrete Casting

 BX-51 is a two-part polyurethane molding system. BX-51 is mixed 100:97 by weight (or 1 Part-A Iso to 1 Part-B…

View full product info…

DP1175 Foundry Plank Repair Paste

DP-11-75 is a two-component, medium-viscosity urethane patch system. A hybrid product, it was designed specifically for making quick responsive repairs/buildups…

View full product info…

DP1183 Urethane Adhesive Slo

DP-11-83 is a low-viscosity, quick-setting, easy-to-use adhesive and/or casting material. This product was designed to bond together our MB1200 foam…

View full product info…

DP1188 Urethane Adhesive

DP-11-88 is a medium-viscosity, quick-setting, easy-to-use urethane adhesive. This system was specifically designed to bond together the MB2001 Model/Tooling Board…

View full product info…

DP1190 Urethane Casting System

DP-11-90 is an unfilled, low-viscosity, quick-setting, two-component urethane system. An easy to use 1 to 1 mix ratio by volume…

View full product info…

EB6200 High-Temp Epoxy Tooling Board (“300°F Epoxy Board”)

BCC Products, Inc./Blehm Plastics announces our newly developed tooling board for the composites industries: EB6200, a high-temperature epoxy tooling board….

View full product info…

High Performance PTMEG Series

Bcc PTMEG series of high performance two-component MDI elastomers when processed and cured at elevated temperatures can give you the performance of…

View full product info…

HPX-850 Backfill System

HPX-850 is a lightweight, heat-resistant, two-component epoxy back-fill system. Like BC7020, the filler portion is pre-blended into the resin and…

View full product info…

This website and its content are copyright of BCC Products  | © BCC Products 2017. All rights reserved.

Site design by Sleeping Giant Creative